How to Make a Portable Solar Panel Stand

A solar panel stand may be an important part of any portable solar panel system. It depends on how you plan to use it.

Make Different Kinds of Portable Solar Panel Stands!



Portable solar panel stand does, definitely, help to ensure that the solar panels are in the best position to capture the sun’s energy and turn it into electrical current.

There are a few different ways that you can make a portable solar panel stand yourself. One way is to use a wooden frame.

You can also use PVC pipes and clamps, or you can build a stand using metal tubing.

How to Make a Portable Solar Panel Stand Using Wooden Frame – Simple Tripod Design

Step 1: The first step is to find three pieces of wood that are the same length. The best way to do this is to go to a local hardware store and purchase three one-foot lengths of 2×4 lumber. Once you have your lumber, cut each piece into thirds using a saw. These will be the legs of your tripod stand.

wooden portable solar panel stand

Step 2: Next, take one of the legs and drill a hole through the center of it. This hole should be big enough to fit a large washer onto it. Repeat this process for the other two legs.

Step 3: Now, take the three legs and arrange them so that they form a tripod shape. 

Step 4: Once you have your tripod shape, take the washers and thread them onto a length of rope or string. Tie the rope or string around the top of the tripod, making sure that the washers are sitting flush against the wood.

Step 5: The last step is to take your solar panel and place it on top of the tripod. Make sure that the solar panel is positioned so that it will receive direct sunlight for the majority of the day. You may need to adjust the position of the tripod throughout the day to ensure that the solar panel receives maximum sunlight exposure.

If you want to get creative, you can also use this same basic design to create a portable solar panel carport. Simply substitute the washers for large bolts and nuts, and use a piece of tarp or canvas to cover the top of the tripod. This will provide protection from the elements for your solar panel and carport.

How to Make a Portable Solar Panel Stand from PVC Pipes and Clamps

If you’re looking for a portable solar panel stand that you can easily move around, then this project is for you. Using just a few PVC pipes and clamps, you can make a portable solar panel stand that’s both strong and lightweight. 

Plus, it’s easy to disassemble and store away when you’re not using it.

Here’s what you’ll need for this project:

– 4 PVC pipes (10 feet long each)

– 8 PVC pipe clamps

– 1 drill

– 4 screws (1.5 inches long each)

– 4 washers (1.5 inches in diameter each)

– 1 solar panel (we used a 100-watt panel for this project)

Step 1: First, take two of the PVC pipes and use the clamps to attach them together at the top, forming a cross. Then, do the same with the other two pipes, attaching them at the bottom.

Step 2: Next, take the four screws and attach them through the washers and into the PVC pipes. Make sure that the screws are tightened securely, but be careful not to strip them.

Step 3: Now, it’s time to attach the solar panel to the stand. First, drill four holes into the back of the panel. Then, line up the holes with the screw holes on the stand and screw the panel into place.

That’s it! Your solar panel stand is now complete. When you’re ready to move it, just unscrew the panel and disassemble the stand. Then, simply reassemble it at your new location.

How to Make Portable Solar Panel Stand Using Metal Tubing

If you’re looking for another way to make your solar panel setup also portable, then you can build a stand using metal tubing. This guide will show you how to do just that, step-by-step.

Step 1: First, gather your materials. You’ll need some length of metal tubing – we recommend at least 3 feet – and a way to cut it to size. You’ll also need something to use as a base for your stand; we suggest a flat piece of wood or metal.

Step 2: Next, cut your tubing to the desired length. If you’re using wood for your base, you may want to predrill holes for the tubing to make assembly easier.

Step 3: Once your tubing is cut to size, it’s time to assemble the stand. If you’re using a wooden base, simply insert the tubing into the holes you drilled earlier. For a metal base, you’ll need to weld or bolt the tubing in place.

Now, all that’s left to do is attach your solar panel(s) to the stand. You can do this using clamps, straps, or by bolting the panel directly to the tubing. And that’s it! Your portable solar panel stand is now complete.

How to Build a Portable Solar Panel Stand Using L Profiles

If you’re interested in learning how to build a solar panel stand using L profiles, then you’ve come to the right place.
l profiles postable solar panels stand

Step 1: First, gather all of the materials you’ll need for this project. This includes an L profile, screws, a drill, and a saw. Once you have all of your materials, it’s time to get started.

Step 2: Begin by cutting the L profile into two pieces. One piece should be about four feet long, while the other should be two feet long. Next, use the screws to attach the two pieces together at the top and bottom.

Step 3: Now, it’s time to attach the solar panel to the stand. Start by drilling a hole in the top of the L profile. Next, insert the solar panel into the hole and secure it in place with screws.

And that’s it! You’ve now successfully built a solar panel stand using L profiles.

How to Build an Adjustable Portable Solar Panel Stand

You will need the following materials:

-4×4 lumber (8 feet long)

-2×4 lumber (8 feet long)

-1/2 inch plywood (4 feet by 8 feet)

-1 inch screws

-3/4 inch screws

-1/2 inch screws

-Solar panel (12 volt, 20 watt)

-Plywood (4 feet by 8 feet)

-1×4 lumber (8 feet long)

-1×6 lumber (8 feet long)

-Circular saw

-Jigsaw

-Drill

-Tape measure

-Safety glasses

Step 1: First, cut the 4×4 lumber into four 8 foot long pieces. Then, cut the 2×4 lumber into four 8 foot long pieces. Next, cut the 1/2 inch plywood into four 4 foot by 8 foot pieces.

Step 2: Next, attach the 2×4’s to the 4×4’s using the 1 inch screws, making sure that the 2×4’s are centered on the 4×4’s. Then, attach the plywood to the 2×4 frame using the 3/4 inch screws.

Step 3: Now, it’s time to attach the solar panel to the frame. First, find the center of the plywood and mark it. Then, find the center of the solar panel and mark it. Next, align the two marks and attach the solar panel to the plywood using the 1/2 inch screws.

Step 4: Now, cut the 1×4 lumber into four 8 foot long pieces. Then, cut the 1×6 lumber into four 8 foot long pieces. Next, attach the 1×4’s to the frame using the 3/4 inch screws, making sure that they are evenly spaced. Then, attach the 1×6’s to the frame using the 1 inch screws, again making sure that they are evenly spaced.

Your stand is now complete! Place it in a sunny spot and enjoy the power of the sun!